Aged, distressing, DIY, Furniture, Glaze, Home Decor, , stain, staining vanity cabinet
I’ve fallen in love with the Restoration Hardware Salvage Gray wood stain. But, try as I might, I haven’t found a pre-mixed stain that producesthe same look. That never deterred me, andI don’t like to give up. Therefore, I created my own recipe for approximating that Restoration Hardware Weathered Gray stain. You may have seen this beautiful gray stain on my Sports Gear Storage Shelves the other day. Because I love you and I love to share, here is the DIY Restoration Hardware Weathered Gray Stain Recipe.
Materials:
- Minwax Provincial Stain
- Old sock
- Rubber gloves
- Fine sandingsponge
- Paint brush
- Clean rag
Glaze:
- 1 partValspar Arid Plains
- 3 partsValspar Clear Glaze
- Jar with lid
DIY Restoration Hardware Weathered Gray Stain Recipe Instructions:
Premix your glaze in a jar or bottle. 1 Part Valspar Arid Plains with 3 parts Valspar clear glaze.
Sand your wood smooth. Put on a rubber glove and slip an old sock over the glove. Dip you hand into the stain and wipe the stain onto your wood. Always wipe on stain with the grain.
After the first coat has dried, repeat by adding a second coat of Minwax Provincial stain. Let the stain dry.
Lightly sand the wood before applying the glaze.
Dip your paint brush into the glaze and paint on top of the stained wood.
Wipe off excess glaze.
And now you have a beautiful warm weathered gray stain.
Pin this graphic to share with friends:
You might also like:
Faux Weathered Gray Wood Grain Tutorial
Hopefully some day Restoration Hardware will sell their beautiful weathered gray stain pre-mixed. Until then, you can always DIY it!
Pin for later!
You might also like:
/41 Comments/by Brittany Bailey
41 replies
« Older Comments
-
Carmen Hamlett says: August 19, 2018 at 2:39 am
Hello! Thanks for sharing this technique, your project looks awesome! I have a laminate dining room table and it has a few spots where the laminate has “lifted” off. Can I still do this if I just lightly sand the table or does this only work with real wood surfaces?
Reply
-
Brittany Bailey says: September 3, 2018 at 9:57 pm
You are going to need to use this technique (which uses paints instead of stains): https://prettyhandygirl.com/faux-finish-weathered-wood-grain/
Reply
-
-
leslie says: March 12, 2018 at 7:41 pm
Can this method be used to restore 100year old oak hardwood flooring
Reply
-
Brittany Bailey says: March 13, 2018 at 1:37 pm
Leslie, I’d probably stick with only stains for your floor. The glaze probably won’t hold up to the traffic on a floor.
Reply
-
-
Hannah says: October 19, 2017 at 2:44 pm
Can you seal this with a matte sealant? Thanks
Reply
-
Hannah says: October 7, 2017 at 8:46 pm
Hi! I’m about to do this tomorrow! What does 1 part & 3 parts mean? Whats the exact measurements to add in of both?
Reply
-
Brittany Bailey says: October 7, 2017 at 9:39 pm
It’s the ratio. If you use 1 cup of arid plains, you’ll used 3 cups of the glaze. This way you can mix your own quantities.
Reply
-
-
Brittany says: May 9, 2017 at 3:14 pm
What wood was used in these pictures? We are making a bunk bed (restoration hardware hack) with white wood and wondered if this stain would look the same on it.
Reply
-
Brittany Bailey says: May 10, 2017 at 9:06 pm
The shelves are plywood (birch) and the wall is also birch plywood underlayment.
Reply
-
-
Sharon says: April 30, 2017 at 2:43 pm
Love this! If I use a wood conditioner first, will this process work on pine? Somehow, I find myself surrounded by pine.
Reply
-
Jamie says: February 21, 2017 at 11:10 pm
I see that you posted Valspar Arid Plains is no longer available. What do you use in its place?
Reply
-
Brittany Bailey says: February 21, 2017 at 11:29 pm
Sorry that was a mistake, I meant to say the glaze may no longer be available. But, there are plenty of other brands of clear glazes.
Reply
-
-
Heidi says: December 22, 2016 at 12:19 pm
Would this work on a Cherry wood table?
Reply
-
Brittany Bailey says: February 21, 2017 at 11:20 pm
I’d use a primer first and paint a base color before trying to add the “stain”. You may actually want to try this tutorial instead: https://prettyhandygirl.com/faux-finish-weathered-wood-grain/
Reply
-
Nancy says: November 7, 2022 at 12:09 pm
Does the stain and glaze have to be either oil or water based or does it not matter?
-
Brittany Bailey says: November 26, 2022 at 6:47 pm
It doesn’t matter. As long as all the stains are the same (oil or water-based).
-
-
Trackbacks & Pingbacks
February 4, 2017 at 10:27 am
[…] DIY Sunbleached Gray Wood Stain from LiveLoveDIY […]
Reply
« Older Comments
Leave a Reply
Want to join the discussion?
Feel free to contribute!
Leave a Reply
This site uses Akismet to reduce spam. Learn how your comment data is processed.
